ExxonMobil™ LDPE LD 105 Series
Units   View this Datasheet as PDF E-Mail a Datasheet Print this Page
Low Density Polyethylene Resin

Product Description
ExxonMobil™ LD 105 resins are homopolymer packaging film resins designed for applications requiring outstanding clarity with good stiffness. These resins can be processed in either blown or cast film equipment. In blown film equipment LD 105.30 and LD 105.DS resins can be drawn down to 1.0 mil gauge.
 
General 
Availability 1 
  • Asia Pacific
  • Latin America
  • North America
Additive 
  • LD 105.BR: Antiblock: 1000 ppm; Slip: 750 ppm; Thermal Stabilizer: Yes
  • LD 105.DS: Antiblock: 1000 ppm; Slip: No; Thermal Stabilizer: Yes
Applications 
  • Blend Partner
  • Bread Bags
  • Display Packaging Film
  • Food Packaging
  • Form Fill And Seal Packaging
  • Freezer Film
  • High Clarity Film
  • High Quality Lamination
  • Lamination Film
  • Laundry Film
  • Light Duty Shrink Film
  • Produce Bags
  • Salad Bags
  • Textile Packaging
Revision Date 
  • 06/17/2020
 
Resin Properties
Typical Value
Unit
Test Based On
Density
0.923
g/cm³
ASTM D1505
Melt Index (190°C/2.16 kg)
2.0
g/10 min
ASTM D1238
Peak Melting Temperature
234
°F
ExxonMobil Method
 
Thermal
Typical Value
Unit
Test Based On
Vicat Softening Temperature
203
°F
ExxonMobil Method
 
Film Properties
Typical Value
Unit
Test Based On
Tensile Strength at Yield MD
1500
psi
ASTM D882
Tensile Strength at Yield TD
1600
psi
ASTM D882
Tensile Strength at Break MD
3400
psi
ASTM D882
Tensile Strength at Break TD
2800
psi
ASTM D882
Elongation at Break MD
180
%
ASTM D882
Elongation at Break TD
510
%
ASTM D882
Secant Modulus MD - 1% Secant
31000
psi
ASTM D882
Secant Modulus TD - 1% Secant
37000
psi
ASTM D882
Dart Drop Impact
90
g
ASTM D1709A
Elmendorf Tear Strength MD
290
g
ASTM D1922
Elmendorf Tear Strength TD
190
g
ASTM D1922
Puncture Force
8
lbf
ExxonMobil Method
Puncture Energy
5.1
in·lb
ExxonMobil Method
 
Optical Properties
Typical Value
Unit
Test Based On
Gloss (45°)
78
 
ASTM D2457
Haze
5.1
%
ASTM D1003
 
Legal Statement
This product is not intended for use in medical applications and should not be used in any such applications.

Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
 
Processing Statement
Film (1.5 mil/38.1 micron) made from LD 105.30 resin on a 2.5 inch (63.5 mm) blown film line with a 2.5:1 blow-up ratio, a melt temperature of 340-360°F (171-182°C), a 30 mil (0.76 mm) die gap at a rate of 8 lbs/hr/in die circumference (1.43 kg/hr/cm).
 
Notes
1Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
 
For additional technical, sales and order assistance: www.exxonmobilchemical.com/ContactUs
Worldwide and the Americas
ExxonMobil Chemical Company
22777 Springwoods Village Parkway
Spring, TX 77389-1425
USA
Asia Pacific
ExxonMobil Chemical Asia Pacific
1 HarbourFront Place
#06-00 HarbourFront Tower One
Singapore 098633
Europe, Middle East and Africa
ExxonMobil Chemical Europe
Hermeslaan 2
1831 Machelen, Belgium

exxonmobilchemical.com

Typical properties: these are not to be construed as specifications.

©2024 ExxonMobil. ExxonMobil, the ExxonMobil logo, the interlocking “X” device and other product or service names used herein are trademarks of ExxonMobil, unless indicated otherwise. This document may not be distributed, displayed, copied or altered without ExxonMobil's prior written authorization. To the extent ExxonMobil authorizes distributing, displaying and/or copying of this document, the user may do so only if the document is unaltered and complete, including all of its headers, footers, disclaimers and other information. You may not copy this document to or reproduce it in whole or in part on a website. ExxonMobil does not guarantee the typical (or other) values. Any data included herein is based upon analysis of representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described. The user is solely responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in this document. This document is not an endorsement of any non-ExxonMobil product or process, and we expressly disclaim any contrary implication. The terms “we,” “our,” "ExxonMobil Chemical" and "ExxonMobil" are each used for convenience, and may include any one or more of ExxonMobil Chemical Company, Exxon Mobil Corporation, or any affiliate either directly or indirectly stewarded.